Coupled Stripline Analysis/Synthesis Calculator

[Coupled Stripline Cross-section]
Zeven = 35.2948 [ohm]
Zodd = 27.0017 [ohm]
Z0 = 30.871 [ohm]
coupling = 0.133123 [-]
coupling = -17.5149 [dB]
Even mode Loss = 0.126305
Odd mode Loss = 0.12368
Even mode Loss/len = 0.126305 /
Odd mode Loss/len = 0.12368
Skin depth = 0.080893
Delay = 0.185624
Even mode delta L = 0
Odd mode delta L = 0
Metal width (W)
Trace spacing (S)
Trace length (L)
Metal thickness (Tmet)
Metal resistivity (Rho) -
Metal surface roughness (Rgh) -RMS
Substrate thickness (H)
Substrate relative dielectric constant (er)
Substrate loss tangent (tand)
Frequency
Z0/k even/odd
Characteristic Impedance [ohms]
Coupling Coefficient [-]
Even Mode Impedance [ohms]
Odd Mode Impedance [ohms]
Electrical Length [degrees]

Return to the main CGI-Wcalc Page.

SourceForge.net Logo
$Id: footer.html,v 1.9 2009/01/11 05:37:45 dan Exp $
$Id: coupled_stripline.html,v 1.5 2009/02/11 00:00:28 dan Exp $
Copyright © 2001-2009 Dan McMahill. ALL RIGHTS RESERVED.
mcmahill at alumD0TmitD0Tedu
Support This Project
CREDITS

This CGI program makes use of the CGIC library which carries the following copyright.

CGIC, copyright 1996, 1997, 1998, 1999, 2000 by Thomas Boutell and Boutell.Com, Inc.. Permission is granted to use CGIC in any application, commercial or noncommercial, at no cost. HOWEVER, this copyright paragraph must appear on a "credits" page accessible in the public online and offline documentation of the program. Modified versions of the CGIC library should not be distributed without the attachment of a clear statement regarding the author of the modifications, and this notice may in no case be removed. Modifications may also be submitted to the author for inclusion in the main CGIC distribution.