Symmetric Stripline Analysis/Synthesis Calculator

[Stripline Circuit Model]
Ls = 6.09917 /
Rs = 208.995 /
Cs = 5.64933 /
Gs = 319.462 /
Z0 = 32.8577 + j 0 [ohm]
Loss = 0.0732126
Loss/len = 0.0732126 /
Skin depth = 0.1144
Delay = 0.185624
End correction = 0
Corrected length = 1000
[Stripline Cross-section]
Metal width (W)
Trace length (L)
Metal thickness (Tmet)
Metal resistivity (RHO) -
Metal surface roughness (RGH) -rms
Substrate thickness (H)
Substrate relative dielectric constant (Er)
Substrate loss tangent (tand)
Characteristic Impedance [ohms]
Electrical Length [degrees]

Return to the main CGI-Wcalc Page. Logo
$Id: footer.html,v 1.9 2009/01/11 05:37:45 dan Exp $
$Id: stripline.html,v 1.12 2009/02/11 00:00:31 dan Exp $
Copyright © 2001-2009 Dan McMahill. ALL RIGHTS RESERVED.
mcmahill at alumD0TmitD0Tedu
Support This Project


This CGI program makes use of the CGIC library which carries the following copyright.

CGIC, copyright 1996, 1997, 1998, 1999, 2000 by Thomas Boutell and Boutell.Com, Inc.. Permission is granted to use CGIC in any application, commercial or noncommercial, at no cost. HOWEVER, this copyright paragraph must appear on a "credits" page accessible in the public online and offline documentation of the program. Modified versions of the CGIC library should not be distributed without the attachment of a clear statement regarding the author of the modifications, and this notice may in no case be removed. Modifications may also be submitted to the author for inclusion in the main CGIC distribution.